Aug
01
2008
5

How to Thaw Frozen Plumbing Pipes

Welcome Stumblers! How about a thumb up if you find this article useful or interesting?

  • Locate the main water cut off for the house and procure any tools that you may need to quickly turn the water off, in case you have leaks when it thaws out. But unless you suspect that you have burst pipes, don’t turn off the water yet. If possible draft an assistant for the extremely dull job of being handy to quickly turn off the water in case you get it to flow, and leaks are detected.
  • Minimize Distracting Noise – You will usually be able to hear water flowing through the pipes once it starts, and turning the radio or TV off could help you to prevent a big mess in case you have a burst pipe.
  • Open up all of the indoor faucets (sinks, bathtubs, etc) for two reasons: 1) if you can achieve just a little bit of flow through the pipes, then often the flowing water will quickly thaw out the ice remaining in the pipes. 2) To relieve pressure when flow is restored so that any leaks will flow at a slower rate to give you more time to turn off the main water valve, and thereby minimize water damage.
  • Crank up the heat. Try to get heat to the areas that are most likely to be frozen. Obviously the most likely places for the pipes to be frozen are where it is coldest – crawl spaces, unheated basements, water meter boxes, garages, etc. Be careful with space heaters and extension cords, you don’t want to burn down the house. Don’t crank up the heat and then run off to town. Keep an eye on everything just in case the water starts to flow. (more…)
  • Powered by WordPress. Theme: TheBuckmaker. Darlehen, Bauplan